Private Branch Exchanges / T−Net; R Button On Private Branch Exchanges; R Button And T−Net; Entering A Dialling Pause - AUDIOLINE Sprint 183 Bedienungsanleitung

7
The … button on the handset is used in private branch exchanges
and for taking advantage of T−Net functions provided by Deutsche
Telekom.
7.1
If the telephone is connected to a private branch exchange, all the
functions linked to the … button, such as transferring calls, automatic
call back, etc., can be used. A private branch exchange requires a Flash
time of 100 ms (refer to Chapter 8.4). The dealer where you purchased
the exchange can provide information as to whether the telephone will
work properly with the exchange.
7.2
Your Audioline telephone supports the most important supplementary
services provided by Deutsche Telekom (e.g. brokering, call waiting,
three−way conferencing, etc.). T−Net operates with a Recall time of 300
ms (refer to Chapter 8.4 for settings). Please contact Deutsche Telekom
with regard to enabling the T−Net functions
7.3
In the case of private branch exchanges, it is necessary to dial a specific
number (e.g. 9" or 0 ) in order to obtain the dialling tone for an outside
line. When using some older private branch exchanges, it takes a little
time before the dialling tone becomes audible. Particularly in the case of
such private branch exchanges, it is possible to insert an automatic
pause after the number for the outside line so that the number can be
dialled in a continuous process without having to wait for the dialling
tone.
2 sec ” P
After dialling the number for the outside line, the telephone then waits 3
seconds before dialling the actual phone number.
Downloaded from www.Manualslib.com
− Private Branch Exchanges / T−Net −
Private Branch Exchanges / T−Net

R button on private branch exchanges

R button and T−Net

Entering a dialling pause

The pause can also be entered with the phone numbers in the
phone book.
manuals search engine
Entering a dialling pause
57