Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Private Branch Exchanges / T−Net
The R button on the telephone is for use in private branch exchanges and when using T−Net
functions provided by Deutsche Telekom.
6.1
R button on private branch exchanges
If the telephone is connected to a private branch exchange, all the functions associated with
the R button, such as transferring calls, automatic call back, etc., can be used. A private
branch exchange requires a recall time of 100 ms (refer to Chapter 14.4). The dealer where
you purchased the exchange can provide information as to whether the telephone will work
properly with the exchange.
6.2
R button with T−Net provided by Deutsche Telekom
Your AUDIOLINE telephone supports the most important added value services provided by
Deutsche Telekom (e.g. brokering, call waiting, three−way conferencing, etc.). T−Net operates
with a recall time of 300 ms (refer to Chapter 14.4 for settings). Please contact Deutsche
Telekom with regard to enabling the T−Net functions.
6.3
Dialling pause
In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or
0") in order to obtain the dialling tone for an outside line. When using some older private
branch exchanges, it takes a little time before the dialling tone becomes audible. With regard
to these private branch exchanges in particular, it is possible to insert an automatic pause after
the number for the outside line so that the number can be dialled in a continuous process
without having to wait for the dialling tone.
After entering the number for the outside line and before continuing with the actual phone
number, press the + button for approx. 2 seconds. P" appears in the display. A pause of
3 seconds is inserted between the number for the outside line and the actual phone number.
NOTE:
The pause can also be entered with the phone numbers in the phone book.
60
− Private Branch Exchanges / T−Net −
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
