Redial; Paging From The Base Station To The Handset - AUDIOLINE DECT 7800 Bedienungsanleitung

4.8

Redial

Use the redial facility when the party called is engaged or does not reply. Your
telephone will store the last five numbers dialled.
1. Press the
display.
2. Further redial numbers can now selected using the
3. Now press the call button
dialled automatically.
If you want to delete a number from the redial list, select the required number and
then press the
Redial numbers can also be stored in the phone book. For more on this see
Chapter 5.1.
4.9

Paging from the base station to the handset

If you cannot remember where you have left the handset, press the paging button
on the base station for two seconds. You will now hear signal tones from the
handset and thus be easily able to find it again. The signal tones can be cancelled
by pressing any button on the handset or the paging button on the base station.
- Operation -
button and the last number dialled will be shown in the
(6) button.
and the phone number displayed will be
and buttons.
53