PIEPS DSP Pro Bedienungsanleitung Seite 35

S oF t WArE uPDAt E
Every PIEPS DSP PRO/DSP SPORT can be tested and updated with
the latest PIEPS software. With your safety in mind our R&D team
is constantly working on improving the software to reflect and
incorporate all our experiences in the field. Every new software is
developed to be compatible with any PIEPS DSP PRO/DSP SPORT.
You can have your PIEPS DSP PRO/DSP SPORT checked and its
software updated at every PIEPS Service Center and PIEPS distributor
or you can do it on your own online on the PIEPS Service-Portal (DSP
update cable needed).
How can you display your software?
When you are switching the beacon on the latest software is indicated on the display.
Further information about the PIEPS software can be found on www.pieps.com
Optional available: PIEPS DSP-data cable for Software-Updates and Online-Function-Check
WArn I n G Co DE S
Error (E)
WArnInG DESCrIPtIon
WArnInG (W)
no indication on display.
E1 The beacon is not fully functional –
stop your tour!
E2
The beacon is limited functional.
The transmitting and receiving
E3
function is reduced.
E4
W
The beacon is limited functional.
The transmitting and receiving
function is not reduced.
WArnInG CorrECtIon
Check batteries (polarity and voltage) and
replace if required. If there is no indication
again, bring beacon to your nearest autho-
rized service center.
Bring beacon to your nearest authorized
service center.
Repeat the process in an interference free
area (outdoor). Check your
environment due to external interferences
(f.e. transmitting beacons, mobile phones). If
the warning is indicated again, bring beacon
to your nearest authorized service center.
Bring beacon to your nearest authorized
service center.
immediate
08/13 | 35