VEZUV
GB
Excessive use of this feature will cause the iron to cool , ensure that the pilot light is
out, before operating the shot of steam control.
Defects and repairs
Do not attempt to replace a defective mains lead .The appliance has to be returned to
an authorized service centre for repair.
Using the self-clean button
The self-clean function must be used before using the appliance for the first time and
then regularly to remove scale
1. Fill the tank to the maximum filling level.
2. Set the temperature control dial to the max position.
3. Plug the appliance in and switch on.
4. Allow the appliance to heat up until the heating light switches off and then on again.
5. Unplug the appliance and hold it horizontally over the sink.
6. Press the self-clean button.
Hot water and steam will come out of the vents.Impurities and scale will be washed
away.
1. Move the iron backwards and forwards while this is happening.
2. Release the self-clean button.
3. Stand the appliance upright on its heel.
4. Plug the appliance in and switch on.
5. Iron an old cloth or towel to dry the soleplate.
17