GB
Cleaning and maintenance
Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a
non-abrasive (liquid) cleaner.
NOTE!
Do not use chemical, steel, wooden or abrasive
cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the
steam generator and the thermal insulating cushion with dry cloth.
3. To remove the mineral deposits collecting at inner steam generator, firstly put the
iron horizontally on a level surface, then tilt the steam generator and unscrew the
drain water cap with the attached screwer, and then drain the steam generator, see
Fig. 4.
NOTE!
If the attached screwer is lost, you can unscrew the
drain water cap with coin.
Drain water cap
Fig. 4
AFTER USE
Bottom of steam generator
Screwer
26