Operation; Cleaning And Maintenance - Fakir THERA Bedienungsanleitung

GB

Operation

1. Hold the iron in a tilted position, then fill proper water into water tank. by measuring
cup, you had better use purified water with less calcium particles and make sure not
to exceed Max level on the tank.
2. Press down cover of water tank and you will hear a click if it is in the correct position.
3. Connect plug to outlet and turn temperature dial to your desired setting, which is
depended on the fabric of garment. And indicator light will be illuminated. Refer to
IRONING TIPS latter.
4. Make sure steam button is on dry position, then place the iron vertically.
5. Once soleplate temperature has reached the preset temperature, indicator light will
be off, then set steam button to your desired steam output or dry position and begin
ironing.
6. Press spraying water button a couple of times to moisten the laundry if necessary,
before spraying make sure that there is enough water in water tank.
7. Steam shot function had better be used at max temperature, as it helps remove
stubborn creases.
8. The iron has an anti-drip function: if ironing garments for long time, soleplate
temperature will fall off, the iron will stop coming out steam automatically and no
water droplets can come out from soleplate.
9. "Steam shot" can also be applied when holding the iron in a vertical position, so this
is useful for removing creases from hung clothes, curtains, etc.

Cleaning and Maintenance

1. Disconnect power supply and empty the water left in water tank.
2. Reconnect into power supply and disconnect after indicator light goes off, make
soleplate dry.
3. Let the iron completely cool down, then wipe flakes and any other deposits on the
soleplate with a damp cloth or a non-abrasive (liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable surface with a cloth protecting
the soleplate.
THERA
16