Scheduling An End Time For Cooking; Setting The Timer - Franke Frames FS 913 M Bedienungsanleitung

EN
example for a complete menu program
Press .
X X
Press MeAT.
X X
The summary of the complete menu appears:
„ „
Section
PROGRAM
TeMPeRATURe
TRAy InFO
TIMe
Place the prepared food in the oven chamber and
X X
close the oven door.
Press to confirm.
X X
The cooking program starts.
„ „
To stop the program, press
X X
The details of the recipes (ingredients and
preparation) are available on our web site:
– http://recipes.franke.com
Description
Automatic set-up of the
cooking program
Automatic set-up of the
temperature
Automatic display of the
optimal position for the tray
Automatic set-up of the
cooking duration
and press
FS 913 M / FS 913 P

Scheduling an end time for cooking

In manual cooking mode
Press .
X X
The menu MAnUAl with different sections
„ „
appears.
Press the area on the top of the display where the
X X
time is displayed (e.g.
The sub
„ „
menu view
appears.
Press .
X X
Choose hours, minutes and seconds by scrolling
X X
through the vertical menu.
Confirm with
X X
The oven is now in standby mode.
„ „
The oven calculates the start time based on the
chosen cooking time or cooking program and the
preset end time. Cooking will start at the calculated
.
start time.

Setting the timer

The timer can be used in all cooking modes, it is
independent from any function.
Press the area on the top of the display where the
X X
time is displayed (e.g.
The sub
„ „
menu view
appears.
Press .
X X
Choose hours, minutes and seconds by scrolling
X X
through the vertical menu.
Press again the area on the top of the display
X X
where the time is displayed (e.g.
Press
X X
The timer runs in the background.
„ „
When finished, you hear a sound.
– 16 –
).
.
).
to confirm.
).