Charging With The Drop-In Tray Single Unit Charger; Charging A Standard Battery - Motorola XT460 Bedienungsanleitung

Charging with the Drop-in Tray Single Unit
Charger
Drop-in Tray
Charger
Port
1. Place the Drop-in Tray Single Unit Charger on a flat surface.
2. Insert the connector of the Power Supply into the port on the
side of the Drop-in Tray Single Unit Charger.
3. Plug the AC Adaptor into a power outlet.
4. Insert the radio into the Drop-in Tray Single Unit Charger with
the radio facing the front, as shown.
Note: When charging a battery attached to a radio, turn the
radio OFF to ensure a full charge. See "Operational
Safety Guidelines" on page 3 for more information.
Drop-in Tray Charger
Power Supply
(Transformer)

Charging a Standard Battery

The Drop-in Tray Single Unit Charger is designed to
charge either the battery (with the radio or with radio and
holster on) or a standalone battery.
Table 1: Motorola Authorized Batteries
Part Number
PMNN4434_R
PMNN4453_R
Description
Standard Li-Ion Battery
High Capacity Li-Ion Battery
9
English