English
► Remove the chain sprocket cover.
► Clean the area around the sprocket with a damp cloth or
STIHL resin solvent.
► Remove foreign matter from the battery compartment and
clean the battery compartment with a damp cloth.
► Clean electrical contacts in the battery compartment with
a soft brush.
► Fit the chain sprocket cover.
15.2 Cleaning the Bar and Chain
► Switch off the chainsaw, engage the chain brake and
remove the battery.
► Remove the bar and chain.
1
► Clean the oil port (1), oil inlet hole (2) and bar groove (3)
with a soft brush or STIHL resin solvent.
► Clean the saw chain with a soft brush or STIHL resin
solvent.
► Mount the bar and chain.
15.3 Cleaning the Battery
► Clean the battery with a damp cloth.
60
16.1 Deburring the Guide Bar
A burr can build up on the outer edge of the guide bar.
► Remove burr with a flat file or a STIHL guide bar dressing
► If you have any queries: Contact your STIHL servicing
16.2 Sharpening the Saw Chain
Correctly sharpening saw chains requires a lot of practice.
STIHL files, STIHL filing aids, STIHL sharpeners and the
brochure "Sharpening STIHL Saw Chains" help you achieve
3
the right results. To obtain the brochure visit http://
www.stihl.com/sharpening-brochure.
STIHL recommends you have saw chains resharpened by a
STIHL servicing dealer.
The chain's cutters are very sharp. There is a risk of cut
2
3
injuries.
► Wear work gloves made of durable material.
► File each cutter with a round file so that the following
16 Maintenance
tool.
dealer.
WARNING
points are observed:
16 Maintenance
0458-791-9621-A