Cleaning And Maintenance - Klarstein AeroDry 10 Bedienungsanleitung

CLEANING AND MAINTENANCE

• Always shut off the unit and unplug it from the mains supply before cleaning or
performing any maintenance.
• When it is not in use for long periods it is advisable to remove the plug from the
power socket.
• Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage to the unit.
Clean the Grille and Case
• Use water and a mild detergent to
clean the washable mesh filters.
Do not use bleach or abrasives.
• Do not splash water directly onto the
main unit. Doing so may cause an
electrical shock and can lead to the
insulation to deteriorate, or cause the
unit to rust.
• The air intake and outlet grilles get soiled easily, so use a vacuum attachment or soft
brush to clean. Wipe the dehumidifier body with a soft damp cloth or kitchen towel.
• Remove the frame and pull out the
filters from the frame. Hoover gently the
optional carbon once every 2-3 weeks
approximately.
• If the mesh filter is dirty hoover it, if it is
heavily soiled wash it with warm soapy
water and dry thoroughly before reinserting
it in the unit.
• When filter cleaning is finished and filters
are dry placed them back into the filter
frame and reassemble the unit.
Note: While the carbon filter is optional never run the unit without the mesh filter
frame being assembled back.
EN
37