Klarstein AeroDry 10 Bedienungsanleitung Seite 31

INTELLIGENT DEFROST
The appliance will defrost automatically as programmed
once the coil sensor detects temperature is too low, and
the defrosting indicator will light up at the same time. Once
defrosting has finishes, the appliance will recover to previous
running mode.
TANK FULL
If the water tank is full, the indicator light comes on and
flashes.
Optional carbon filter (air purification function)
Take out the carbon filter from bag and insert it on the filter. It
is suggested to hoover the carbon filter every 2-3 weeks and
change them every 3-6 months to always keep the room fresh
and odor free.
Humidity Level and 2digit Timer Display
The led indicator performs the following functions:
1 When the unit is plugged in, it will indicate the room humidity
level.
2 When the humidity level is selected, it will indicate the set
humidity.
3 When the start/stop timer is programmed, it will show the set
timer.
Note: When humidity level is outside the normal operational parameters will show
"LO"/"HI". If ambient humidity is lower than 20 %, it will show "LO". If ambient
humidity is higher than 90 %, it will show "HI".
EN
31