Initial Operation - Klarstein AeroDry 10 Bedienungsanleitung

EN
28
• The dehumidifier is built to be compact and lightweight. The castors on the bottom of
the unit make it easy to move from room to room.
Note: Do not force castors to move over carpet or uneven surfaces, nor move the
unit with water in the tank as it may tip over and spill water.

INITIAL OPERATION

• Remove any water from the water tank before starting the unit.
• In order to save energy, do not open windows or doors while the unit is running.
• Place the unit on a hard, flat surface.
• On first use run the unit continuously for 24 hours.
• The dehumidifier uses compressor technology to extract water from the environment
and is ideal for normal domestic or office environment which are heated during
the winter months with temperatures above. The appliance features an intelligent
humidistat which is adjustable in increments of 5 % from 40-80 % RH insuring your
room is not dried too much and power is not wasted.
To reduce the noise level:
• Place a piece of carpet or a rubber mat under the unit to reduce any vibrations
while the unit is running.