Maintencance And Cleaning - Klarstein DRYBEST 2000 2G Bedienungsanleitung

OPERATION
1. After removing the packaging materials, there should be 2 items:
• Mini dehumidifier
• AC wire
2. Plug the output of AC wire cord to the AC power socket, then connect the
input plug to the appropriate main socket.
3. Press the "ON/OFF" button to "ON" position, the mini dehumidifier will begin
to operate. The green LED will be turned on. Listen and feel for the air blowing
from dry air outlet.
4. To switch off the unit, press "ON/OFF" button to "OFF" position, the mini
dehumidifier will be turned off.
5. The dehumidifier have Air fresh function, when the dehumidifier is turn on,
the Air fresh function will start work, and the two sides LED will be turn on.
6. The dehumidifier have auto-stop function. When the water tank is full, the
dehumidifier will auto-stop, and the Red Led will turn on.

MAINTENCANCE AND CLEANING

Removable water tank
When the water tank is full, with approximately 1500 ml to 2000 ml of water
collected, the unit will auto- matically switched off and the „Red" LED will come on.
To remove the water tank, first switch off the mini dehumidifier, press „ON/OFF"
button to the „OFF" posi- tion. Then remove the water tank from the unit and pour
the water out to the toilet or bathroom. Put the water tank back into the unit. To
continue dehumidifying, press the „ON/OFF" button to the correct position again.
Cleaning
Before cleaning the unit, turn off the mini dehumidifier and unplug the AC plug
from the main socket first. Use a soft cloth to clean the surface of the unit and a
soft bristled brush to remove dust from the air inlet and outlet grills.
EN
9