Frequently Asked Questions (Faq) - Klarstein AeroDry 10 Bedienungsanleitung

EN
38
Clean the watertank
• Every few weeks, clean the tank to prevent growth of mould, mildew and bacteria.
Partially fill the tank with clean water and add a little mild detergent. Swish it
around and than empty the tank and rinse.
Note: Do not use a dishwasher to clean the tank. After cleaning and drying the tank
must be reinserted securely into dehumidifier in order to restart operation.
End of Season Maintenance:
• Empty and clean the watertank.
• Clean the unit and the filters as per cleaning procedure above.
• Coil the power cord on the special cord storage rest at the back of the unit
• Cover the unit and keep it in a dry place.

FREQUENTLY ASKED QUESTIONS (FAQ)

Why doesn't the dehumidifier seem to extract much water form the air if the
1
temperature is low?
This is a compressor dehumidifier which works best in temperatures above 15 °C.
If the temperature is low and the air is dryer than the setting on the humidistat the
unit will not extract water. If you want to use a dehumidifier for outside buildings,
unheated properties, boats or garages please check our desiccant range.
Why doesn't the unit work or stops suddenly?
2
The water tank may be full or displaced. To rectify: empty the tank and carefully
place the tank back in the unit. Also the unit may be running in dehumidifying mode
with a low room temperature. Please check if the room temperature is lower than
5 °C. If so, the unit will stop working while in dehumidifying mode. (The unit may be
defrosting.)
The ambient operating range is between 5 °C and 35 °C with a relative humidity
ranging from 30 % to 80 %. For maximum efficiency use the unit between 15 °C
and 32 °C.