Klarstein AeroDry 10 Bedienungsanleitung Seite 40

EN
40
Problem
Dehumidifier does not
extract water
Airflow seems weak
Unit is noisy during
operation Is the unit on
uneven surface?
Please place on flat
horizontal surface.
E3 or E4
E1 or E2
E5 or E6
Possible Cause
Is the unit set to a
humidity level lower than
the one in the room?
Is the temperature too low
for water extraction to be
efficient?
Is any intake grill or
discharge blocked?
Is the unit too close to
walls?
Is filter dirty or clogged?
Is the unit on uneven
surface?
Is filter clogged?
Humidity sensor error
Temperature sensor error
Abnormal Coil sensor
temperature or current
Possible Solution
Set the humidity level
on the humidistat bellow
current humidity reading.
Increase temperature in
the room or reposition
the unit.
Remove obstructions and
restart the unit. Ensure a
distance of at least 20 cm
between the unit and
walls.
Please service the filters
regularly as per user
manual.
Please place on flat
horizontal surface.
Please service the filters
regularly as per user
manual.
Use the unit within the
prescribed humidity range.
Unplug the unit, rest and
plug it back in. If error
repeats, call for costumer
service.
Use the unit within the
prescribed temperature
range. Unplug the unit,
rest and plug it back in.
If error repeats, call for
costumer service.
Use the unit within the
prescribed humidity
and temperature range.
Unplug the unit, rest and
plug it back in. If error
repeats, call for costumer
service.