Product Description; Use And Operation - Klarstein 10028211 Handbuch

Product Description

1 On/Off button
2 Green LED = On
3 Yellow LED = Full
4 Air inlet
5 Removable water tank
6 Dry air outlet
7 DC power socket
8 Rubber feet
9 AC/DC switching mode power supply
10 DC power jack
11 Plug with power cord
12 Water displacement hole
13 Water tank
14 Float switch

Use and Operation

Getting Started
• To remove excess moisture from small rooms, place dehumidifier in preferred area.
• Insert smaller end of AC/DC Power Adapter into DC Power Socket.
• Connect other end to wall socket.
• Toggle On/Off Switch to On position.
• To turn unit off at any time, toggle On/Off Switch to Off position first, then unplug AC/DC Power
Adapter.
Emptying Water Tank
• The Dehumidifier will automatically turn off once tank is full.
• The Yellow „Full" LED will turn on.
• Before removing water tank, toggle On/Off Switch to Off position.
• Insert two fingers into Tank Pull-Out Handle and gently pull out.
• Pull out plug from Water Displacement Hole.
• Pour collected water out from tank into sink or toilet.
• Reinsert plug and slide tank back into device until it clicks.
• Device is now ready for use again.
6