Trouble-Shooting And Service - clage FX Gebrauchs- Und Montageanleitung

10. Trouble­shooting and service
The following table will help you to determine and rectify the reasons for possible problems.
Problem
Display: »no« and
appliance does not
response to the remote
control
Display: » -- « and radio
symbol flashes
Symbol »battery« lights
Temperature changes
unintentional
Cause
Remote control is not registered
at the instantaneous water heater
Transmission range exceeded
Disturbance caused by other
transmitters
Registration in process
Flat batteries
Another remote control is using
the same radio channel.
Solution
Register again
Place the remote control closer to the appli-
ance, press button
Have the position of the transmission unit
inside the appliance checked
Hold the remote control in front of the instan-
taneous water heater
Insert two new type AAA-batteries
Select a free radio channel
23