5. Installation
5.2.1 Funkadapter im MCX montieren
Achtung!
Vor der Installation des Funkadapters
den Durchlauferhitzer spannungsfrei
schalten!
Achten Sie auf die korrekte Position
des Steckers!
Der Stecker muss richtig in die Nut
gesteckt sein.
Abbildung 3:
Montage des Funkadapters
5. Installation
5.2.1 Mounting the transmission unit inside a
MCX
11
Attention!
Before assembling the trans-
mission unit disconnect the
instantaneous water heater
from the mains supply!
Pay attention to the proper
position of the connector!
The connector has to be fitted
into the notch properly.
Installation of transmission unit
Figure 3: