Accessing The Isis Interface In Quickscan - Xerox DocuMate 4830 Benutzerhandbuch

Accessing the ISIS Interface in QuickScan

Open the QuickScan software to access the ISIS driver scanning options. Please note that you may see the following
warning message:
1. Please disregard the message and click Continue.
The ISIS drivers were installed correctly during the installation of your scanner.
The Scanner Selection dialog box will then appear.
Select Xerox DocuMate 4830 from the list of scanners and click OK.
2.
Your scanner is then ready to work with the ISIS driver.
172 Xerox DocuMate 4830
User's Guide