Optimum CC-3010 Bedienungsanleitung Seite 14

CC3010_IM_351.qxp 2009-12-16
Operation
General
The appliance is intended only for domestic use, not for professional use.
1. Teapot
2. Tea filter
3. Teapot lid
4. Jug lid
5. Jug
6. Jug kettle On/Off switch
7. Jug kettle indicator light
8. Power cord and plug
9. Base
10. Hotplate On/Off switch
11. Jug connector
12. Hotplate indicator light
13. Teapot hotplate
Operation
Using for the First Time
1. Take all the parts of the appliance out of the packaging,
and remove all labels and stickers.
2. Clean the appliance thoroughly (see 'Cleaning and
maintenance').
3. Fill the jug kettle with the maximum quantity of cold
water ('MAX') and boil the water (see 'Boiling water').
4. Repeat Step 3 two to three times.
5. Do not use the boiled water; dispose of it immediately.
14
13:33 Page 14 (Black plate)
Boiling Water
1. Remove the jug from the base.
2. Open the jug's lid.
3. Fill the jug with the required quantity of water, but never
above the maximum waterlevel mark ('MAX'). Make
sure that you do not spill any water on the base.
4. Close the jug's lid. Press the lid until it clicks into place.
5. Place the jug on the base, and insert the plug in the wall
socket.
6. Push the jug kettle's On/Off switch downwards. The jug
kettle's indicator light will illuminate to show that the
appliance is switched on.
7. The jug kettle switches off automatically a few seconds
after the water has come to the boil. However, this auto-
matic cut-out operates only when the jug's lid is closed
securely. The jug kettle's indicator light will extinguish
once it switches off.
8. A further quantity of water can be boiled once the appli-
ance has cooled down (this will take a few minutes).
9. Remove the plug from the wall socket after use.