Specifications - Makita HR2450X Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Switch trigger
1-2. Lock button
2-1. Lamp
3-1. Switch trigger
3-2. Reversing switch lever
4-1. Quick change chuck for SDS-plus
4-2. Change cover line
4-3. Change cover
5-1. Quick change drill chuck
5-2. Change cover line
5-3. Change cover
5-4. Spindle
6-1. Rotation with hammering
6-2. Lock button
6-3. Action mode changing knob
7-1. Rotation only

SPECIFICATIONS

Concrete
Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Explanation of general view
8-1. Hammering only
9-1. Grip base
9-2. Side grip
9-3. Loosen
9-4. Teeth
9-5. Protrusion
9-6. Tighten
10-1. Bit shank
10-2. Bit grease
11-1. Bit
11-2. Chuck cover
12-1. Bit
12-2. Chuck cover
13-1. Lock button
13-2. Action mode changing knob
15-1. Depth gauge
Model
Tungsten-carbide tipped bit
Core bit
Diamond core bit
Steel
Wood
-1
)
Overall length
Net weight
Safety class
HR2450/HR2450X/HR2450F/HR2451
360 mm
2.7 kg
ENE043-1
Noise
The typical
according to EN60745:
Model
HR2450,HR2450F,HR2450X,HR2450T,HR2450FT
ENF002-2
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
16-1. Dust cup
18-1. Blow-out bulb
20-1. Chuck adapter
20-2. Keyless drill chuck
21-1. Quick change chuck for SDS-plus
21-2. Change cover line
21-3. Change cover
22-1. Quick change drill chuck
22-2. Change cover line
22-3. Change cover
22-4. Spindle
23-1. Sleeve
23-2. Ring
23-3. Quick change drill chuck
HR2450T/HR2450FT
24 mm
54 mm
65 mm
13 mm
32 mm
0 - 1,100
0 - 4,500
/II
A-weighted noise level
) : 86 dB(A)
pA
) : 97 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 13.5 m/s
h,CHeq
2
384 mm
2.9 kg
ENG905-1
determined
ENG900-1
vector sum)
2