In Seasons With Particularly - Kärcher SV 7 Bedienungsanleitung

Mounting the attachments
Illustration
 Slide the locking mechanism of the floor
nozzle outwards.
 Put the insert into the bottom side of the
brush.
 To secure the insert, slide the locking
mechanism inwards.
 Removing the insert: Slide the locking
mechanism outwards again.
 Remove the insert.
Detail nozzle
The closer you hold the nozzle to the dirty
spot, the higher the cleaning effect as tem-
perature and pressure of the steam reach
their maximum values immediately when
they are emitted from the nozzle.
Application examples
 The use of the detail nozzle is recom-
mended for hard to reach areas.
 Cleaning of stainless steel, window
panes, mirrors and enamel surfaces.
 Cleaning of corners on stairs, window
frames, door posts, aluminium profiles.
 Cleaning of fittings.
 Cleaning of window shutters, radiators.
Detail nozzle and accessories
ATTENTION
Material damage (e.g. scratches
on painted surfaces) due to the
use of the round brush on sensi-
tive surfaces.
Do not use the round brush

on sensitive surfaces.
 The round brush is suitable for stubborn
soiling on especially small surfaces
such as stove tops, roller shutters, tile
joints, sanitary facilities, etc.
 Extension: With this accessory an opti-
mum cleaning of places that are partic-
ularly hard to reach is possible. Ideal for
cleaning heaters, door posts, windows,
roller shutters, sanitary facilities.
Application examples
 The use of the hand suction nozzle is
recommended for large glass and mir-
ror surfaces, smooth surfaces in gener-
al or for the cleaning of textile surfaces,
such as sofas, mattresses, etc.
Hand nozzle and accessories
 Window cleaning insert wide: Window
panes and surfaces of larger dimen-
sions.
 Window cleaning insert narrow: Win-
dow panes and surfaces of smaller di-
mensions.
 Brush collar: For carpets, staircases,
car interiors, textile surfaces in general
(after carrying out a test on a hidden ar-
ea). For abrasive cleaning and scrub-
bing.
 Terry cloth cover: Pull over the hand
nozzle. Especially well-suited for small
washable areas, shower stalls and mir-
rors.
Cleaning of Glass
ATTENTION
Material damage due to steam
release onto cold window
panes.

In seasons with particularly


low temperatures, pre-warm
the window panes by releas-
ing steam with a distance of
approx. 50 cm to the surface
to be treated.
ATTENTION
Material damage due to steam
release onto sealed spots of the
window frame.
Do not level the steam at

these spots.
 Apply steam to the glass surface from a
distance of approximately 20 cm until
the surface is moistened evenly.
 Switch off the steam supply.
– 15
EN
Hand nozzle
29