Medela Symphony Gebrauchsanweisung Seite 31

5
Insert the tubing into the
corresponding opening in the
connector.
2
Position the membrane cap at the end of the
tubing firmly onto the membrane in the
housing, to form a seal. Centre the tubing
connector in the recess in the pump housing.
➙ Make sure that the membrane cap
engages and lies flush to the surface.
6
Place the membrane with the round
side up onto a flat surface. Push the
cap into the membrane until it engages.
Insert the tubing adapter into the
opening in the membrane cap.
3
Close the lid.
31