Dokumentation der pH-Messung nach GLP
Documentation of pH measurement according to GLP
Start der Datenausgabe: Druckersymbol
leuchtet.
Nach vollständiger Datenübertragung
erlischt das Druckersymbol.
Diag prot
Das Diagnoseprotokoll besteht aus den
folgenden Protokollen:
•
Auto prot (Protokoll des letzten
AutoChecks)
•
CAL hist (Kalibrierdaten der letzten 3
Start der Datenausgabe.
Conf data
Start der Datenausgabe.
CAL data
BA11101/05.00/Pla/pH540GLP-4
Diagnose-Protokoll ausgeben:
Kalibrierungen)
Konfiguration des Geräts
ausgeben (Configuration data):
Kalibrier-Daten der letzten
Kalibrierung ausgeben
(Calibration data).
Start of data output: Printer symbol is lit.
After the data are completely transmitted the
printer symbol extinguishes.
Diag prot Output of diagnosis protocol:
The diagnosis protocol consists of the
following protocols:
•
Auto prot (protocol of last AutoCheck)
•
CAL hist (calibration data of the last 3
calibrations)
Start data output.
Conf data Output of instrument con-
figuration (Configuration data):
Start data output.
CAL data
Output of calibration data of
the last calibration (Calibration
data).
93