English | 33 - Bosch 0 602 304 40. Betriebsanleitung

OBJ_BUCH-698-001.book Page 33 Thursday, September 3, 2009 12:19 PM
g) If devices are provided for the connec-
tion of dust extraction and collection fa-
cilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it was de-
signed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be re-
paired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Bosch Power Tools
5) Service
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
Safety Warnings for Angle Grinder
Safety warnings common for sanding with
sanding discs and polishing
Applies for the following types:
– 0 602 301 4..
– 0 602 305 40.
– 0 602 306 434
– 0 602 324 40.
– 0 602 327 401
This power tool is to be used as a sander
and polisher. Observe all safety warnings,
instructions, illustrations and data supplied
with the power tool. Non-observance of the
following instructions can lead to electric
shock, fire and/or serious injury.
This power tool is not suitable for grinding,
working with wire brushes and cut-off
grinding. Applications, for which the power
tool is not intended for, can lead to hazard-
ous situations and injury.
Safety warnings common for grinding, working
with wire brushes and cut-off grinding
Applies for the following types:
– 0 602 304 40.
– 0 602 324 44., ... 464, ... 474, ... 434
– 0 602 329 4..
– 0 602 331 4..
– 0 602 332 4..
– 0 602 334 4..
– 0 602 335 0..
This power tool is to be used as a grinder,
wire brush and cut off grinder. Observe all
safety warnings, instructions, illustrations
and data supplied with the power tool. Non-
observance of the following instructions can
lead to electric shock, fire and/or serious in-
jury.

English | 33

3 609 929 B88 | (9/3/09)