Ordering Replacement Parts; Disposal And Recycling; Troubleshooting; Possible Cause - Parkside PDS 120 A1 Originalbetriebsanleitung

10.3 Storage
Store the equipment and accessories out of children's reach
in a dark and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30 °C. Store the
electric tool in its original packaging.

10.4 Ordering replacement parts

The following information must be provided on all orders for
spare parts:
• Model/type of the equipment
• Article number of the equipment

11. Disposal and recycling

The equipment is supplied in packaging to prevent it from be-
ing damaged in transit. The raw materials in this packaging
can be reused or recycled. The equipment and its accesso-
ries are made of various types of material, such as metal and
plastic. Defective components must be disposed of as special
waste. Ask your dealer or your local council.
12.

Troubleshooting

Problem

Possible Cause

Saw blade gets loose Fastening nut tightened insufficiently
after turning off the
motor
Motor does not start a) Failure mains fuse
b) Extension cable defect
c) Connections on the motor or switch defect
d) Motor or switch defect
45 GB
Help
Tighten fastening nut, M20 left-handed thread
a) Check the mains fuse.
b) Change extension cable
c) Have it checked by an electrican
d) Have it checked by an electrician