Endress+Hauser Minilog B RDL10 Version II Bedienungsanleitung Seite 52

12. Technical data
Environmental Installation conditions
conditions
Installation hint
Environmental conditions
Ambient temp.
Storage temp.
Climate class
Environmental Ingress protection IP 65/NEMA4 with closed cover
conditions,
Vibration security IEC 654-3, v<3mm/s, 1<f<150 Hz
continued
EMC/Immunity
RF protection
Interference safety
-ESD
-Electromagnetic
fields
-Burst (supply
circuit)
-Burst (signal
circuit)
-Surge,
HF discharge
-Normal mode
noise rejection
Housing Dimensions
construction
Weight
Material
Electrical
connections
Display and Display
operating level
Operating level
Power supply Power supply
Battery life cycle
Certificates CE
Technical alterations reserved
50
The unit should be mounted vertically, for this a wall
or stand pipe mounting kit can be ordered.
-25 °C to +55 °C
-25 °C to +60 °C
IEC 654 Part 1 class C1
To EN 55011 Group 1, Class B
To EN 61000-4-2, Level 3, 6/8 kV
To EN 61000-4-3, Level 3,103 V/m
To EN 61000-4-4, Level 3, 1 kV / 2 kV
To EN 61000-4-4, Level 3, 1 kV
To EN 61000-4-6, 10 V
additional measurement accuracy ≤ 0.5%
26 dB at input range/10, f = 50/60 Hz, not on
resistance measurement
W: 100 mm / H: 100 mm / D: 60 mm
approx. 0.520 kg
Housing: Aluminium die cast, surface galvanised
Wall/stand pipe adapter: 1.4301
Strap: 1.4301
Two wire connection (three wire on Pt 100).
Connection access using 2 PG 9 cable glands
(optionally 1 x ½ " NPT thread instead of 1 x PG9).
Termination on 2.5 mm
ferrule.
LC-Display, 7 segment, prefix, decimal point, limit
symbol, battery status symbol
PC software package for setting up, transmission and
display of measured data. Software will run under
Windows 95 / 98 / NT4.0 / ME / 2000.
Lithium battery 3.6 Volt Type AA, optionally Type C or
external power supply 7to 30 VDC, approx. 5 mA
Monthly readout:
Continuous readout: min. 1 month
89/336/EWG guide lines
2
terminals, 1.5 mm
Type AA (2.1 Ah)Type C (7.2 Ah)
min. 2 Years min. 5 Years
min. 2 month
2
core with