Herunterladen Diese Seite drucken

teutonia Elegance Bedienungsanleitung Seite 12

Vorschau ausblenden Andere Handbücher für Elegance:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Attaching and removing the sports buggy seat or
carry-cot (upper section)
Place the upper section (sports buggy seat or carry-cot)
onto the pram chassis in such a way that the lateral
bars 1 of the upper section click into the slots provid-
ed 2 on each side of the chassis and push the upper
section in as far as it will go. The locks then close
automatically. (The locks must „click" into place.)
WARNING:
Check that the pram body or seat unit at-
tachment devices are correctly engaged
before use.
The upper section is secure if the red
field in the release lever is no longer visible. To remove
the upper section press the safety lever (3) up and
then the release lever (4) down until the lever locks.
(red field appears). Then pull the upper section out of
the slots and remove it.
How to use the hood
Push the insert pieces for the hood joints into the
corresponding openings on the armrest or on the
carry-cot.
Attention: You must secure the press studs on the
back end of the cover onto the rear of the backrest
as the cover is also used as a protection against
falling out.
If you need to remove the hood, undo the press studs
on the rear of the backrest; press the release buttons
on the insert pieces of the hood joints and pull the
joints out of the openings. You can open the zip at the
top of the hood for ventilation.
12
Adjusting the Backrest
4
3
Adjusting the Footrest
Lift the footrest and engage the bar in the required
strut.
Caution: There is a red safety hook at the footrest.
When the footrest is horizontal this hook must be
pushed onto the adjusting bar.
Using the 5-point harness
You can position the shoulder harnesses at 3 levels.
Always use the position closest to the shoulder level
of your child. To open the harness press the central
button on the buckle. To adjust the shoulder/ weist
harness pull the free ends of the strap.
Pull the grip 1 upwards and
move the backrest 2 into
the
required
position.
Please make sure that the
backrest re-engages prop-
erly.

Werbung

loading