Troubleshooting - Ariete EVOLUTION 2.0 Anleitung

TROUbLEsHOOTING

Code on the Cause
display (1)
E01 Left wheel not working.
E02 Right wheel not working.
E04 The appliance body is raised.
E05
Defect in sensor beam for low
obstacles (T).
E06
Defect in sensor beam for high
obstacles (E).
E07 Left brush not working.
E08
Right brush not working.
E09
Appliance body blocked.
E10
The appliance body is set to
charge with the switch (Q) on
OFF.
E11
Product malfunction.
E12
Product malfunction.
E13
Product malfunction.
E14 No battery or Robot off.
Icon (2) and Dust container full or suction
"!" on opening blocked.
Note:
if errors persist, reset the Robot from the switch (Q) in the bottom. If this does not work, contact
an authorised assistance centre.
Solution
Check the left wheel.
Check the right wheel.
Reposition the Robot on the floor.
Clean the sensors and if the problem persists,
send for repairs.
Check the sensitivity of the sensor beam and that
there are no foreign objects.
Check the left brush.
Right the left brush.
Move the Robot and restart.
Move the switch (Q) to ON.
Switch off the appliance and contact an authorised
assistance centre.
Switch off the appliance and contact an authorised
assistance centre.
Switch off the appliance and contact an authorised
assistance centre.
Make sure the batteries have been inserted or that
the on button is set to ON.
Clean the dust container and suction opening.
- 35 -
EN