Sensor Cleaning - Ariete EVOLUTION 2.0 Anleitung

E N
- Remove the HEPA filter using the special
tab and clean it with the brush.
Important!
Wash the HEPA filter every 15-30 days and replace it every 6 months.
- Empty the container and clean it with the brush and/or wash it.
- Dry all the parts and then re-fit them, taking care to insert the Hepa filter in its special housing.
Important!
Always make sure that items or dirt build-up has not blocked the suction openings and
remove gently, if necessary, using a soft, dry cloth to prevent the SPOT function from
being activated continually.

sENsOR CLEANING

- Clean the Robot with a soft dry cloth, being particularly gentle over the sensor beam (E) and contact
points for the charging base.
- Make sure that the wheels or their housing are not blocked by dirt.
- 34 -