Elite volare force mag Bedienungsanleitung Seite 13

C
C
•
Using the handle (G), tighten the right hand side
axle support (E) until the right support cup (D)
comes in contact with the bicycle's right side QR
hub (Fig. 8).
•
After contact is made, tighten the handle (G) for
about 3/4 of a rotation to fix the bicycle to the
frame.
•
Lock the fixing mechanism by using the locking
ring (F) of the handle towards locking position
(Fig. 9).
F
6
7
D
E G
8
9
•
If the bicycle's rear wheel is not centered with
the drum, move the resistance unit sideways by
loosening the screws (I) (Fig. 10) and lock it in the
correct position.
•
Test that the bicycle is secure by pushing and
pulling the top tube and operating on the sadd-
le. If the bicycle is not stable, make sure that
the QR lever and hub are positioned correctly,
and the locking ring (F) is in the right position.
•
Release the Spring Plate (H) lock by pushing
down on the Spring Plate with the palm of your
hand (Y) and, with your fingers, pull upwards
the Spring Plate release (Z) (Fig. 11).
Allow the Spring Plate (H) to slowly rotate
upwards until the resistance unit's drum makes
contact with the tyre. (Fig. 12).
H
Y
Z
EN
10
11
12
13