Herunterladen Inhalt Inhalt Diese Seite drucken

Betamotor EVO 80 Bedienungsanleitung Seite 30

Inhaltsverzeichnis

Werbung

Olio forcella
Per la sostituzione procedere nel
modo seguente:
- Allentare la vite A serraggio stelo
sinistro
- Svitare il tappo B
- Svitare la vite di scarico olio C
- Posizionare un contenitore sotto lo
stelo
- Far fuoriuscire l'olio
- Riavvitare la vite C di scarico
- Riempire lo stelo con:
370 ± 5 cc di olio (EVO 80)
180 cc di olio (EVO 80 Junior)
- Rimontare il tappo
- Stringere le viti del trapezio.
- Operare allo stesso modo all'altro
stelo.
Nota:
Per le sostituzioni attenersi alla tabel-
la a pag. 39, utilizzando i lubrificanti
consigliati a pag. 20.
Per qualsiasi anomalia di funziona-
mento rivolgeteVi alla nostra cate-
na di assistenza autorizzata.
Fork oil
B
A
To replace the oil, proceed as fol-
lows:
- Loosen left leg lock screw A.
- Unscrew cap B.
- Unscrew oil drain screw C.
- Place a container under the shaft.
- Drain the oil.
- Replace drain screw C.
- Pour in fresh
370 ± 5 cc oil (EVO 80)
180 cc oil (EVO 80 Junior)
- Replace cap.
- Tighten the support screws.
- Make the same operation to the
other shaft.
Note:
For oil changes, follow the instruc-
tions given on the chart on page 39,
using the lubricants recommended
C
on page 20.
In the event of any malfunction,
contact our authorized service net-
work.
3
oil:
29

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Evo 80 junior

Inhaltsverzeichnis