Daily Use - AEG GS45BVM Benutzerinformation

8.2 How to fill the rinse aid
dispenser

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Make sure that the appliance is in user
mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion.
To prevent it, after you fill
the salt container, start a
programme.
A
A
+
1. Press the release button (D) to open
2. Fill the dispenser (A) until the rinse
3. Remove the spilled rinse aid with an
B
4. Close the lid. Make sure that the
-
C
D
9.1 Using the detergent
1. Press the release button (B) to open
2. Put the detergent, in powder or
3. If the programme has a prewash
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
the lid (C).
aid reaches the marking ''MAX''.
absorbent cloth to prevent too much
foam.
release button locks into position.
You can turn the selector of
the released quantity (B)
between position 1 (lowest
quantity) and position 4
(highest quantity). Factory
setting: level 4.
A B
30
20
CAUTION!
Only use detergent
specifically designed for
dishwashers.
the lid (C).
tablets, in the compartment (A).
phase, put a small quantity of
detergent on the inner part of the
appliance door.
ENGLISH 71
C