Kärcher SB MU 908 Originalbetriebsanleitung Seite 66

Acknowledge the faults
During normal operation, active faults are
shown alternating in sequence.
The number in parentheses shows the total
number of faults present.
If a fault must be acknowledged, the dis-
play will stand still:
 Fault code (F: XXX) locate the fault in
the table above and follow the instruc-
tions to eliminate the fault.
 To acknowledge, press the „ESC" key.
 Press the "OK" button to confirm.
The fault is acknowledged.
NOTICE
If more faults should be displayed without
confirming the displayed fault, press the
key RIGHT.
Viewing the list of faults
The control can store a maximum of 256
occurred faults.
When the fault list is full, the oldest mes-
sage will be overwritten by the newest one.
 Press the "ESC" key repeatedly until
the following display appears:
 Press OK button for more than 2 sec-
onds.
 Press the LEFT button.
Sum of archived fault messages
 Press "OK" in order to get into the most
recently archived fault message.
1 Date of fault occurrence
2 Time of fault occurrence
3 Errow code
4 List position/number of same faults in
the fault list
66
 Browse through the fault list using the
"LEFT" and "RIGHT" keys.
 Details of the currently displayed fault
can be viewed via the "OK" key.
1 Error description
2 Errow code
3 Number of same faults in the fault list
Clearing the error memory
 Press the keys LEFT and RIGHT simul-
taneously.
 Press "OK" in order to delete the fault
list
or
 Press "ESC" in order not to delete the
fault list
Viewing the event list
The control can store a maximum of 256
occurred faults (e.g. activities in water
preparation).
When the event list is full, the oldest mes-
sage will be overwritten by the newest one.
 Press the "ESC" key repeatedly until
the following display appears:
 Press OK button for more than 2 sec-
onds.
 Press the LEFT button.
 Press the RIGHT button.
The subsequent operation is done in the
same way as with "Viewing the fault list".
29
-
EN