Manual Interventions; Sales Indicator - Kärcher SB MU 908 Originalbetriebsanleitung

Fill softening salts
ATTENTION
Risk of functional disturbances. While filling
the softening salts, use only the softening
salt in the tablet form listed in the chapter
"Accessories".
1 Salt tank
 Open the salt tank.
 Fill the softening salt right until the top.
 Close the salt tank.
NOTICE
An empty salt tank will cause disruption in
operations! Fill the salt tank at the latest
when water is visible in the salt tank while
removing the lid. Filling the salt container
to the top does not mean that there will be
an increase in salt consumption.
When the plant is functioning properly, the
ratio of salt consumption to water con-
sumption is constant.
We recommend that you document the salt
and water consumption in an operations
log.

Manual interventions

 In normal operating mode, press the
"OK" key on the control longer than 2
seconds.
 Press the LEFT button.
 Press the RIGHT button twice.
 Press the OK button.
Menu for manual interventions
 Select the menu item with the buttons
LEFT and RIGHT.
Every pressing of the "OK" key increases
the washing credit of the selected washing
station (box) by one washing unit.
When the "OK" key is pressed, the washing
station lights turn on for 3 minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
Pressing the "OK" key activates the perme-
ate production in the ABS WSO. Permeate
production will end when the buffer tank is
filled with permeate. If the buffer tank is al-
ready full when permeate production starts,
the permeate production cycle will end after
3 minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
Pressing the "OK" key activates the regen-
eration of the base exchanger in the ABS
WSO. The regeneration cannot be exited.
When the "OK" key is pressed, the circula-
tion pump activates frost protection for 3
minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
When the "OK" key is pressed, the foam
hose heater is activated for 3 minutes.
If the "OK" key is pressed again prior to the
time elapse, the function is terminated.
10
-
EN

Sales indicator

 In normal operating mode, press the
"OK" key on the control longer than 2
seconds.
 Press the LEFT button.
 Press the RIGHT button three times.
 Press the OK button.
NOTICE
During first start-up, the password is
"1111". For security reason, we recom-
mend changing the password during the
firste use (see "Changing password" at the
end of this chapter).
 Use the LEFT and RIGHT buttons to
select the blinking location of the pass-
word.
 Confirm your entry using the "OK" key.
 Set the other characters of the pass-
word in the same fashion.
 Press the "OK" key for more than 1 sec-
ond to save the password.
 Select the menu item with the buttons
LEFT and RIGHT.
Total sales since start-up of the washing
system.
Sales per washing station since start-up of
the washing system.
Total sales since the the beginning of the
day (0:00 Uhr).
47