Accessories - ABB ACS55 Betriebsanleitung

24
Approvals
CE
The ACS55 complies with the requirements of the European
• Low Voltage Directive 73/23/EEC with amendments
• EMC Directive 89/336/EEC with amendments.
Corresponding declarations and a list of main standards are
available on request.
Electromagnetic compatibility:
The ACS55 fulfils the following standards provided that installation
is done properly and according to the instructions of this manual:
Conductive high frequency
emissions
Radiated high frequency
emissions
Immunity
Line current harmonics
1) Observe the maximum allowed motor cable lengths and
switching frequency, page 23. See also cabling instructions on
page 19.
The current harmonic levels can be reduced by fitting external input
chokes.
UL, cUL and C-Tick markings
See the rating plate.
UL, cUL:
The ACS55 is suitable for use on a circuit capable of delivering not
more than 65 kA rms symmetrical amperes, 230 volts maximum,
when protected by CC or T class fuses.
EN61800-3 first environment, unrestricted/
1)
restricted distribution
EN61800-3 first environment, restricted
distribution
EN61800-3 second environment
IEC61000-3-2
C-Tick:
For the electromagnetic compatibility, see the specification in
section CE above.
Compliance with the European Machinery Directive
The drive complies with the European Machinery Directive
requirements for an equipment intended to be incorporated into
machinery. The declaration of incorporation is available from ABB.
Product protection in the USA
This product is protected by one or more of the following US
patents
4,920,306 5,301,085 5,463,302
5,654,624 5,799,805 5,940,286
6,175,256 6,184,740 6,195,274
6,313,599 6,316,896 6,335,607
6,552,510 6,597,148 6,600,290
6,859,374 6,922,883 6,940,253
6,972,976 6,977,449 6,984,958
7,034,510 7,036,223 7,045,987
7,084,604 7,098,623 7,102,325
7,215,099 7,221,152 7,227,325
7,274,573 7,279,802 7,280,938
7,372,696 7,388,765 7,408,791
7,515,447 7,560,894 D503,931
D512,026 D512,696 D521,466
D548,182S D548,183S D573,090S
Other patents pending.

Accessories

Input chokes: CHK-A1, CHK-B1, CHK-C1, CHK-D1
Output choke: ACS-CHK-B3, ACS-CHK-C3
Potentiometer unit: ACS55-POT
DriveConfig kit, for more information please contact your local ABB
office. See DriveConfig User's Guide [3AFE68910897 (English)].
5,521,483 5,532,568 5,589,754
5,942,874 5,952,613 6,094,364
6,229,356 6,252,436 6,265,724
6,370,049 6,396,236 6,448,735
6,741,059 6,774,758 6,844,794
6,934,169 6,956,352 6,958,923
6,985,371 6,992,908 6,999,329
7,057,908 7,059,390 7,067,997
7,109,780 7,164,562 7,176,779
7,245,197 7,250,739 7,262,577
7,330,095 7,349,814 7,352,220
7,417,408 7,446,268 7,456,615
D510,319 D510,320 D511,137
D541,743S D541,744S D541,745S
EN
5,612,604
6,147,887
6,305,464
6,498,452
6,856,502
6,967,453
7,023,160
7,082,374
7,190,599
7,271,505
7,365,622
7,508,688
D511,150