Auswahl des Kalibrierverfahrens
AutoCal:
Automatisches Kalibrieren mit DIN/NBS-
Standardpufferlösungen nach DIN 19266.
Die Daten der folgenden 5 DIN-
Standardpufferlösungen sind gespeichert:
AutoCal Var:
Automatisches Kalibrieren mit Technischen
oder anderen Pufferlösungen, deren Daten im
Gerät gespeichert sind.
Bei Auslieferung sind die Daten der vier
WTW-Technischen Pufferlösungen gewählt:
ConCal:
Konventionelles Kalibrieren mit beliebigen
Pufferlösungen.
12
pH-Werte bei 25°C
pH values at 25°C
pH = 1.679
pH = 4.006
pH = 6.865
pH = 9.180
pH = 12.454
pH-Werte bei 25°C
pH values at 25°C
pH = 2.00
pH = 4.01
pH = 7.00
pH = 10.00
Kalibrieren
Calibration
Selection of calibration procedure
AutoCal:
Automatic calibration with DIN/NBS standard
buffer solutions according to DIN 19266.
The data of the following 5 DIN standard
buffer solutions are stored in the meter:
DIN-Bezeichnung
DIN designation
A
C
D
F
G
AutoCal Var:
Automatic calibration with technical or other
buffers the data of which are stored in the
meter.
When the instrument is delivered the data of
the four WTW Technical buffers have been
selected:
WTW-Modell
WTW model
TPL 2
TPL 4
TPL 7
TPL 10
ConCal:
Conventional calibration with any buffers.
WTW-Modell
WTW model
PL 2
PL 4
PL 7
PL 9
PL 12
BA11102/05.00/Pla/pH540GLP-4