Herunterladen Inhalt Inhalt Diese Seite drucken

Liquid Gas Heater For Free-Standing Installation In Fixed Awning Structures; Intended Use; Important Operating Notes - Truma Trumatic S 3002 FS Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Trumatic S 3002 FS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Trumatic S 3002 FS

Liquid gas heater for free-standing installation in fixed awning structures

6
7

Intended use

The Trumatic S 3002 FS liquid gas heater has been designed
for stationary installation in fixed awning structures.
Operating the heater will only be allowed using 30 mbar LPG-
supply from the caravan or motorcaravan (e.g. via BBQ point).
The equipment must not be used in vehicles (campers)
or coaches.
The heater has a combustion air / exhaust circuit that is sealed
from the installation area.
Other applications are only permitted after prior consultation
with Truma.

Important operating notes

1. The combustion air intake (2) must be kept free of dirt and
slush.
2. Before switching on the heater in winter, clear all snow
from the cowl (4).
10
4
3
5
2
1
8
7
1 Liquid gas heaterTrumatic S 3002 FS
2 Combustion air intake
3 Exhaust duct with insulating duct
4 Exhaust gas cowl
5 Trumavent fan TEB 2
6 Warm air pipes
7 Warm air outlets
8 Gas supply
6
3. Inspect the exhaust duct and all connections at regular
intervals, and always in the event of blowback (misfire). It is
essential for the exhaust duct to be installed so that it slopes
upwards over its whole length and is secured with several
clamps. Never place any object on the exhaust duct, since this
could result in damage. The exhaust duct connection to both
the heater and the cowl must be firm and well sealed. It is no
longer per missible to operate heaters with incorrectly fitted or
damaged exhaust ducts!
4. Never allow the warm air outlet on the heater to be
obstructed in any way. For instance never hang washing
on or in front of the heater to dry. Misusing your heater in this
way could cause serious damage from overheating. Do not
place flammable objects near the heater. Please follow these
guidelines in the interest of your own safety.
Due to the design, the heating front case will
become hot during operation. The operator is
obliged to ensure that due care is taken to pro-
tect third parties (small children in particular).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis