SOMFY Power 4x2.5 DC RTS Gebrauchsanleitung Seite 31

G GROUP CONTROL
A group control is available.
However to readjust an output individually, a transmitter must be paired on this output and
only on this one.
If several outputs are paired on the same transmitter, (example output 2,3,4 paired on the
same transmitter) :
During the readjustment of the My position, only the My position of the 1st group output
(output 2 of the example) will be modified.
During the readjustment of the sun disappearing position, only the sun disappearing
position of the 1st group output will be modified.
During the readjustment of the privacy feature, only the privacy feature of the 1st group
output will be modified.
During the readjustment of the wheel increment, only the wheel increment of the 1st group
output will be modified.
During the readjustment of the tilting speed, only the tilting speed of the 1st group output
will be modified
H TROUBLE SHOOTING
Nothing works:
Check the wiring (cf SDEV-FICA 38).
Check the motor.
Check the power supply.
Check the battery of the transmitter.
Check the compatibility of the transmitter.
Check that the transmitter has been properly
recorded..
No My position:
The My position can only be programmed if the timer for raising and lowering the blind
are set (C.4.e).
Problem with the functions :
Check you are in the right mode (Venetian or Roller) (C.4.a).
Lost in your programming mode:
Just make a complete reset and start again (F3).
TECHNICAL DATA : page 86
Copyright © 2010 Somfy SAS. All rights reserved - V0 - 04/2010 29