SOMFY Power 4x2.5 DC RTS Gebrauchsanleitung Seite 20

Choosing the type of mode :
The Power 4x2.5 DC RTS Receiver is designed to work with 2 modes:
Venetian blind mode or roller blind mode.
The Power 4x2.5 DC RTS Receiver is set by default to work in roller blind mode.
This feature allows setting the Power 4x2.5 DC RTS Receiver to be set according to
the type of blind you are working with.
Motor rotation direction :
It is possible, during installation or future adjusting, to change the rotation direction of
the motor with the remote control. This will allow to link the upward motion of the blind
with the raise button on the remote control.
Tilting using the Mod/Var scroll wheel :
This feature can only be used with a Mod/Var remote control.
It allows to associate the direction of the scroll wheel with the desired orientation of
the slats.
Timer setting for raising and lowering of the blind :
The objective is to adjust the operation time of the blind when raising and lowering. It
does not replace the limit switches.
This adjustment allows optimising the blind operation and to set automatically a My
position. Without this, the My position can not be used.
Sun sensor operation:
This feature can only be used in the roller blind mode.
It is possible to use a RTS sunlight sensor to automatically operate the blind (ex:
close the blinds when the sun comes out).
For the sensor to operate at its best the parameters can be adjusted.
My position:
The My position corresponds to the user's favorite position of the blind in given
situations: for example, adjusting the position of the blind in order to work on your
computer in mid-day by lowering the blinds half-way, etc...
Setting the slat speed tilting fonction:
This feature can only be used with a standard 3 buttons remote control and in the
venitian blind mode.
To orient the blades on a Venetian blind, you can press-and-hold the up and down
buttons on the remote control.The tilting speed can be adjusted.
Adjusting the scroll wheel movement on the remote control:
This feature can only be used with a Mod/Var remote control.
To tilt the slats on a Venetian blind, you can use the scroll wheel on the Mod/Var
remote control.This feature allows the scroll wheel sensitivity to be adjusted.
Disappearing sun position:
This feature can only be used with Venetian blinds.
It allows the slats to be set an horizontal position in case the sun disappears.
This feature requires the use of a sun sensor.
Privacy feature:
This feature allows the sun automatic operation to be activated or disactivated when
the blind is closed in order to maintain your privacy. This feature requires the use of a
sun sensor.
18
A few definitions
Copyright © 2010 Somfy SAS. All rights reserved - V0 - 04/2010
p22
p22
p22
p24
p23
p25
p26
p26
p27
p28