Set-Up - SOMFY S&SO-RS100 io HYBRID Anleitung

EN

2.3. SET-UP

Identifying the steps to be performed
Two set-up procedures are possible:
-
‡ either with the wired control point only: Procedure diagram A
‡ or with a Somfy io-homecontrol
The settings for the end limits depend on the type of roller shutter:
-
For a roller shutter
with rigid links and
with stops =
Plug&Play Operation
No setting to be performed:
the end limits are set
automatically.
Check that the roller
1
shutter and its
accessories are robustly
¿[HG
Please consult the roller
shutter manufacturer
or Somfy for information on
the compatibility of the drive
with the roller shutter and its
accessories.
Step A2 (optional): Programming a io-homecontrol
OPERATION with a io-homecontrol
6
Copyright © 2014 - 2015 Somfy SAS. All rights reserved.
® control point: Procedure diagram B
Procedure diagram A
For a roller shutter
without rigid links and
without stops
The upper and lower end
limits must be set in manual
mode.
Step A1
Setting / resetting
of end limits in
manual mode
OPERATION with the wired control point
For a roller shutter
without rigid links and
with stops or with rigid
links and without stops
The upper and lower end
limits must be set in semi-
automatic mode.
a
:
Setting / resetting
of end limits in
semi-automatic mode
®
control point
®
control point
b
Step A1 :
Non contractual images.