Storch 65 60 00 Bedienungsanleitung Seite 48

Valve soiled or clogged
- Pressure gauge does not show full pressure
- The high pressure hose vibrates
- Water exits intermittently
- Valves can become clogged if you have not used the
device for an extended period.
1. If a valve is clogged,
2. the pressure gauge will show little or no pressure!
3. Otherwise the high pressure cleaner will vibrate!
4. Use a ring spanner to open the valve...
5. ... and remove the valve screw, the valve and the
rubber ring,
6. straighten a paper clip...
7. ... and use it to remove the dirt from the valve
- the inside valve must be closed!
8. Push the rubber seal back in tight!
9. Re-tighten the valve screw
10. ... and repeat this for all 6 valves!
11. That is how quick the fault is eliminated!
Valve housing
48