Tube Preparation; Motor/Tube Assembly - SOMFY ilmo 50 WT Gebrauchsanleitung

Ilmo 50 WT_5050496X00_multi_6-corr.qxd
Installation instructions

Tube preparation

[3]. Cut the tube to the required length.
Deburr the tube and remove the swarf.
[4]. For smooth tubes, cut a notch with the
exact measurements given in figure [4].

Motor/tube assembly

[5]. Slide the motor into the tube.
For smooth tubes, position the notch on the
crown.
[6]. Fix the tube to the motor with 4 x Ø 5 mm
self-tapping screws or 4 steel pop rivets of
Ø 4.8 mm depending on the dimension (L).
Mounting the motorized tube
[7]. Mount the motorized tube on the end
bracket (e).
[8]. Mount the motorized tube on the motor
bracket (f).
Fit the stop ring (g).
Wiring
Switch off the current.
a
Blue
b
Brown
c
Black
d
Yellow/Green
Copyright © 2007 Somfy SAS. All rights reserved - V0 - 12/2007
6/12/07
[3]
[4]
[5]
[6]
[7]
[8]
a
b
c
d
Neutral (N)
Live, direction 1
Live, direction 2
Earth (W)
9:36 Page 19
Ø>47mm
25mm
4 mm
15 mm
g
f
Motor
a
N
d
W
L
Control Point
ilmo 50 WT
5 mm
20 mm
e
b
c
- 19