Ilmo 50 WT_5050496X00_multi_6-corr.qxd
ilmo 50 WT
Commissioning
[1]. Switch the current on again.
Press the "Raise" button at the control point:
- If the roller shutter rises, the wiring is
correct and commissioning is finished.
- If the roller shutter descends, go to the next
step.
[2]. Switch off the power.
Transpose the brown wire and the black
wire connected to the control point.
[3]. Switch the power back on.
Press the "Raise" button to check the
direction of rotation.
[4]. If the motor is not used for several
weeks, carry out two full cycles.
Operation
[1]. Press the Raise button:
The roller shutter rises and stops at the top
stop without requiring adjustment.
[2]. Press the Lower button:
The roller shutter descends and stops at the
bottom stop without requiring adjustment.
20 -
6/12/07
9:36
Page 20
[1]
[2]
[3]
[4]
[1]
[2]
Copyright © 2007 Somfy SAS. All rights reserved - V0 - 12/2007
Installation instructions