Operation - BWT Infinity A Einbau- Und Bedienungsanleitung

Set Press Set Set
Set Set
Wait 10 sec. Dots stop flashing.
Set Set Set
Set Set
The pressure appears in the display
0.0 P 0.0 P, when no water is used. 0.0 P
0.0 P 0.0 P
A third filter must be set to SL 2
Disconnect and reconnect all filters to the mains.
The filters will be backwashed in sequence: Master
SL 1 SL 1 SL 2 SL 2
SL 1, SL 2 SL 1 SL 1 SL 2 and SL 3 SL 2
The time until the next backwashing time until the next backwashing time until the next backwashing time until the next backwashing and the pres- time until the next backwashing
sure difference appear alternately in the master sure difference sure difference sure difference sure difference
filter display. The pressure difference is only dis-
played for large volumes of water.
Only the pressure difference Only the pressure difference Only the pressure difference appears in the slave Only the pressure difference Only the pressure difference
filter display.
The filters are ready for use.

Operation

Operation
Operation Operation Operation
We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that
the device is backwashed at least once a month the device is backwashed at least once a month the device is backwashed at least once a month the device is backwashed at least once a month the device is backwashed at least once a month
to pre to pre to prev v v v v ent f ent f ent f
to pre to pre ent f ent foreign par
the filter element (more frequently for higher the filter element (more frequently for higher the filter element (more frequently for higher
the filter element (more frequently for higher the filter element (more frequently for higher
levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days).
Setting the backwash interval Setting the backwash interval
Setting the backwash interval Setting the backwash interval Setting the backwash interval
see Starting the unit
Manual backwashing Manual backwashing
Manual backwashing Manual backwashing Manual backwashing
Unplugging and plugging in the device can back-
wash it at any time.
Display Display
Display Display Display
displays the time until the next backwashing.
Infinity AP only Infinity AP only Infinity AP only Infinity AP only Infinity AP only
time until the next backwashing time until the next backwashing
The time until the next backwashing time until the next backwashing and the pres- time until the next backwashing
sure difference sure diff sure diff
sure diff sure diff
pressure difference is only displayed for large vol-
umes of water.
When operating in parallel, the slave filter only dis-
plays the pressure difference.
Cleaning Cleaning Cleaning Cleaning Cleaning
Clean plastic parts with a soft, damp cloth only; do
not use solvents, detergents, or acidic cleaning
agents.
SL 1 SL 1 SL 1
SL 1 SL 1
SL 2 SL 2 SL 2 SL 2 and a fourth to SL 3
SL 3 SL 3
SL 3 SL 3.
oreign par oreign par ticles from adher ticles from adher
oreign particles from adher oreign par ticles from adhering to ticles from adher
erence erence are displayed alternately. The erence
erence
GB GB GB
GB GB
SL 3. SL 3 SL 3 SL 3
Master, Master Master Master
pres- pres- pres- pres-
ing to ing to
ing to ing to
pres- pres-
pres- pres-
1 9 1 9 1 9 1 9 1 9