Expanding The Telephone System; Multiple Handsets - switel DFT 8071 Bedienungsanleitung

11 Expanding the Telephone System

1
The international GAP standard regulates the compatibility of handsets
and base stations from different manufacturers. As a result, it is possible to
integrate SWITEL devices and devices from other manufacturers together
in one telephone system. It is possible, however, that certain functions are
not available.

Multiple handsets

Up to 5 handsets can be registered on the base station.
Registering handsets
Before starting with the registration process for a handset, switch the re-
spective base station to Registration mode.
10 sec ‘, {ì}
Complete the registration process for your handset, . Page 97. The cur-
rently valid PIN code is used for registration purposes, . Page 97.
The handset is automatically assigned an internal call number following
registration. The internal call number appears in the display.
To register handsets from other manufacturers, please refer to
the operating manual supplied with them.
Deregistering handsets
Each handset can deregister itself and other handsets registered
on the base station. The message No Base found!" appears in
the display of the handset deregistered.
Deregistering handsets . Page 97.
1
GAP: Generic Access Profile = Standard for the interoperation of
handsets and base stations from other manufacturers.
93
Activate Registration mode
Expanding the Telephone System
Multiple base stations
Your handsets can be simultaneously registered on up to 4 different base
stations. Each base station requires its own telephone cable socket. Con-
nections can be used with the same call number or with different ones.
Switch the respective base stations to Registration mode. Register the
handset . Page 97. Select the base station you wish to use for telepho-
ning using the Base Selection" menu, . Page 97.
101