In The Case Of Problems; Problems And Solutions - switel DFT 8071 Bedienungsanleitung

In the Case of Problems

12 In the Case of Problems
Service hotline
Should problems arise with the telephone, please refer to the following in-
formation first. In the case of technical problems, please contact our hot-
line under tel. 0900 00 16 75 (only valid for calls within Switzerland − costs
at time of going to print: CHF 2.00 / min.). In the case of claims under the
terms of guarantee, contact your sales outlet. There is a 2 year period of
guarantee.

Problems and solutions

Problems
No connection to
base station
possible
No telephone calls
possible
Connection is
disturbed or cut off
The system no
longer responds
102
Solutions
− Check that the handset has been registered
on the base station with the correct PIN code.
. Page 97
− The telephone is not connected properly or is
defective. Only use the telephone connection
cable supplied.
− Test whether the telephone connection is in
order by using another telephone.
− The power adaptor plug is not plugged in or
there is a complete power failure.
− The rechargeable batteries are empty or de-
fective.
− The handset is too far from the base station.
− Dialling mode is set incorrectly. . Page 97
− The handset is too far from the base station.
− The base station is in an unsuitable location.
− Reset all the functions to their default settings.
. Page 103
− Disconnect the power adapter plug briefly
from the power socket.
− Remove the batteries briefly from the handset.
Problems Solutions
The batteries are − Batteries are empty or defective.
empty in a short − Place the handset in the base station properly.
time Clean the contact surfaces on the handset
and base station with a soft, dry cloth.
− Place the handset in the base station for 16
hours.
1
The CLIP function − The caller number display function is an optio-
does not work nal service offered by telephone network pro-
viders. Contact your network provider for furt-
her information.
− The caller has suppressed the transmission of
their phone number.
The answering ma- − Ensure that the answering machine is con-
chine no longer nected correctly and switched on.
records messages/ − Check whether the answering machine mem-
memos ory is full. Delete messages from the memory,
if necessary. . Page 93
No remote access − Check that the correct PIN code has been en-
tered for the remote access. . Page 94
functions can be
executed − The telephone used for remote access must
be set to tone dialling.
1
CLIP: Calling Line Identification Presentation