Selecting A Base Station - switel DCC632x Combo Series Bedienungsanleitung

Registering and de-registering a handset

6.4 Selecting a base station

If your handset is registered to more than one base station (max. 4), you must select one of these base
stations since the handset only communicates with one base station at a time. There are two options:
Auto Select
If you set the handset to 'Auto Select', the handset will automatically search for the nearest base
station in standby mode.
Manual Select
If you set the handset to 'Manual Select', the handset will only search for the base station you have
set.
124
4 Enter the internal number of the handset you want to de-register (1-5)
and confirm.
Once the handset has been successfully deregistered, it reverts to
standby mode. Otherwise you will be asked to enter the handset
number again.
Important: Handsets can only be de-registered when they are not in use.
1 Press the Menu / OK key.
2 Select "HANDSET" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select "AUTO" and confirm.
Info: If you allow the base station to be selected automatically and the handset goes out of
range of the current base station, the handset will only search for the strongest base station
in standby mode (not during a call).
1 Press the Menu / OK key.
2 Select "HANDSET" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select "MANUAL" and confirm.
5 Select the base station and confirm.
Important: For the base and the handset to be able to communicate, the handset must be
registered to that base.