First Steps; Installing The Base Station - switel DCC632x Combo Series Bedienungsanleitung

First steps

3 First steps
3.1 How to use this User Guide
The following method is used in this User Guide to clarify instructions:
Key to be pressed

3.2 Installing the base station

Install the base station as follows:
1 Connect the mains adapter to the base station first and then to a socket.
2 Connect one end of the telephone cable to the telephone socket on the wall and the other to the
connector on the back of the base station.
3 The telephone and power cables should be connected as shown in figure 3A.
- 3A Base station -
A. Telephone wall socket
B. Mains adapter with cable
C. Telephone cable
104
Text ..... HANDSET
Text that appears on the telephone display
A